Prep Work

#1 We start out by removing any dust pebbles or foreign debris that is not securely fastened to the drive way.

#2 Next scrub any oil or gas spots that will interfere with the seal coating process.

#3 Then we fill each crack ( less then 5/16 in dia.) with a special crack caucking.

#4 Lastly we prime any hazardous liquid stains(gas,oil,etc.) with a special primer.

Seal Coating

#1 We proceed to tape every corner to assure that the Tarmac will stay on the driveway, not your sidewalk or grass.

#2 We must wait 1 hour for the priming to completely dry.

#3 We then proceed to apply the Tarmac.